Corner Pop III
$ 38.50
I'm proud to announce a brilliant tool collaboration between Studio 180 Design and the Running with Scissors Quilters, The Corner Pop III! Built upon the same idea as the original Corner Pop tool, this tool will allow you to add popped corners with a 3:1 ratio. What that means is that CP3 will make pops that are three times as tall as they are wide which will give you some great, spiky looks.
Details
- Ruler Size: approx. 6" x 13"
- Twenty one size options
- Step by step illustrated instructions, available to download
- Instructions for left hand cutting and trimming
- Fine lines for higher accuracy
- Free online video for unit construction and tool trim down (coming soon)
- Numerous companion patterns available
- Item # DT21
Corner Pop II
$ 38.50
I'm proud to announce a brilliant tool collaboration between Studio 180 Design and the Running with Scissors Quilters, The Corner Pop II! Built upon the same idea as the original Corner Pop tool, this tool will allow you to add popped corners with a 2:1 ratio. What that means is that CP2 will make pops that are twice as tall as they are wide which will give you some great, spiky looks.
Details
- Ruler Size: approx. 8" x 14"
- Twenty one size options
- Step by step illustrated instructions, available to download
- Instructions for left hand cutting and trimming
- Fine lines for higher accuracy
- Free online video for unit construction and tool trim down (coming soon)
- Numerous companion patterns are available
- Item # DT20
Corner Pop
$ 38.50
Finally, a tool and technique that will give you high success adding fabric corners to basic shapes. For years we’ve been layering small squares on big squares, marking & stitching on a diagonal line, then hoping everything lines up when we fold the small corner section back into place. If you’ve tried it, you know the pitfalls: too big, too short, too crooked and way too wasteful. No more. With your new Corner Pop tool, you will be able to trim rather than mark, add an oversized replacement triangle and then square everything to a perfect size. In twenty four different sizes - whole, half and quarter inches. Increased success without undue stress for every level of quilter. What’s not to love!
Details
- Ruler Size: approx. 9½" x 9½"
- Twenty four size options from ¼" finished corners to 6" finished corners in ¼" increments
- Step by step illustrated instructions, available to download
- Instructions for left hand cutting and trimming
- Fine lines for higher accuracy
- Free online video for unit construction and tool trim down (see below, also on YouTube)
- Numerous companion patterns available
- Item # DT16
Video Demonstration
Journeys
$ 32.50
We each have our own journey through life, full of many experiences that teach us and fill us with wonder. As you work through this quilt, we hope you find this journey just as inspirational as we did. You will use 8 different tools as you work your way through this project. Sections of the quilt are assembled several times during construction so that the final assembly is a breeze. This is the pattern only.
Details
- Project Size: 102" x 102"
- Required tools: Four Patch Square Up, Tucker Trimmer I, Wing Clipper I, Corner Pop, Rapid Fire Lemoyne Star, Square Squared, Corner Beam, V Block
- Fabric: 12 different prints (not included)
- Pattern # BOM01
- To audition different colors click here for a blackline master.
Radiance
$ 13.50
Graduated colors and graduated unit sizes give this unique throw-sized quilt a stunning amount of movement and visual interest. This beauty uses 5 Studio 180 Design tools, so it can be a great opportunity to brush up on your skills or learn some new techniques. If you’re up for lots of variety in your construction, then this is the quilt for you!
Details
- One project size: 67" x 67"
- Required tools: Corner Beam®, Corner Pop®, Rapid Fire® Lemoyne Star, Tucker Trimmer® III, and V Block®
- Fabric: 5 different values of two colors with an accent and background
- Pattern # DTP095
Different Perspective
$ 12.40
Try taking a different perspective on making diamonds! You use your Tucker Trimmer® I and Corner Pop® II to make diamonds in an unusual way. By popping the corners of Shaded Four Patch units and pairing them with regular Shaded Four Patch units, you get a unique and modern quilt with lots of space for custom quilting. We hope you enjoy making this quilt that has you seeing things from a different perspective.
Details
- Three project sizes: Baby, Lap, Twin
- Required tools: Tucker Trimmer® I, Corner Pop ® II
- Fabric: Assorted Mediums, Dark, Background
- Pattern # Mod037
Bougainvillea
$ 12.40
Pretty flowers and huge thorns is what we saw when we first looked at this design, so the name could only be Bougainvillea! You’ll have fun working with this planned color scheme, making big blocks, and then adding more interest by double popping the corners to create something really unique.
Details
- Project Sizes: Lap, Twin, and Queen
- Required tools: Tucker Trimmer I, Corner Pop III
- Fabric: Dark, medium, light green, medium and dark red, and background
- Pattern # Mod035
Comet Trails
$ 12.40
Stars connected by chains look like the trail a comet leaves through space. Make your own trail through the stars using just two different sized V Blocks and an intersecting block that’s easy to construct. And you know what that means. You will have this project whipped up in no time!
Details
- Project sizes: 76" x 112"
- Required tools: Corner Pop II, Four Patch Square Up, V Block
- Pattern # Mod033
Pleiades
$ 12.40
As quilters, we seem to find inspiration for quilt patterns all around us. As early as 1845, quilts called “Seven Sisters” have been part of quilting history. Seven Sisters designs are made up of a grouping of seven stars in a roughly circular arrangement with one star in the center. The name Pleiades comes from a group of stars named for those seven sisters - the daughters of Pleione in Greek mythology. We hope that you will enjoy making our more modern rendition of this 175 year old pattern.
Details
- Project Size: 70½” x 85½”
- Required tools: Tucker Trimmer I, Corner Pop II
- Fabric: Medium, Dark, Accent, Background
- Pattern # Mod032
Electric Pixel
$ 12.40
When your computer monitor goes a little bit crazy, that’s what this design reminded us of. While the monitor situation is less than ideal, this design is a real winner! Fun and easy, this colorful project is the perfect one to use your favorite grouping of fat eighths with some additional yardage. Strip piecing and big units make this project come together quickly.
Details
- Project Sizes: Lap, Twin, and Queen
- Required tools: Tucker Trimmer III, Corner Pop III
- Fabric: scrappy mediums, dark, light, accent, borders
- Pattern # Mod031
All That Wander
$ 12.40
The beautiful pathway in this design is created using a second background, edged with colorful triangles. This quilt provides a new perspective on a traditional log cabin. You will have a wonderful time along the way as you create this fun and easy design.
Designed by Rosella Hanson.
Details
- Finished project size: Queen (90” x 90”)
- Required tools: Corner Pop 2, Wing Clipper 1, Tucker Trimmer 3
- Fabric: Two colors in three values (6 total), Accent Color, and 2 Backgrounds
- Pattern # DTP080
Bauble
$ 12.40
Like a glittering bauble dancing in the sunlight, this quilt is a bright dance of color. Using your Corner Pop III, 6 colorful fat quarters, and a background, this beautiful quilt will surely brighten your day!
Details
- Project Size: 69" x 85"
- Required tools: Corner Pop III
- Fabric: Asst. colors, accent, and background
- Pattern # Mod024
Pyramid Power
$ 12.40
Using your favorite scrap fabrics and your Corner Pop II and Corner Pop III tools, create reflecting pyramids to grow your Pyramid Power. We recommend that as you pick your fabrics, pair each dark fabric with a light fabric in the same color. For example, a dark red and a light red, a dark blue and a light blue, etc. This will allow you to effectively create the shadowing effect seen in the cover quilt.
Details
- Project Sizes: Throw, Twin, and Queen
- Required tools: Corner Pop II, Corner Pop III
- Fabric: Light and Dark scraps, Dark Accent, and background
- Pattern # Mod025
Tumbleweeds
$ 12.40
Tumbleweeds bouncing across the desert in a stiff breeze. That’s what I think of every time I look at this quilt. Using our Corner Pop II and one simple block, you quickly and easily create a project full of movement that goes together in a snap.
Details
- Three project sizes: Lap, Twin, Queen
- Required tool: Corner Pop II
- Fabric: background, darks (4), accent
- Pattern # Mod023
Snowdrops
$ 12.40
From the designer, my daughter, Haley: Growing up in Vermont, my favorite sign of spring was snowdrop flowers popping out from under the snow. I always found the dichotomy between their delicate looks and their hearty resistance to the bitter cold of the Northeastern winters particularly striking. This quilt is inspired by these blooms, blossoming in the dark and cold, against all odds.
Details
- Two project sizes: 43” x 60” / 60” x 77”
- Required tools: Corner Beam, Corner Pop, V Block, Rapid Fire Lemoyne Star
- Fabric: 3 colors, dark, and background
- Pattern # DTP077
Ripples
$ 12.40
The circular design of this quilt makes me think of a reflecting pool, with the surface of the water rippling in the breeze. The cool blues and purples provide a feeling of serenity. The intricate design is made easier with straight seams and an on point setting. It is suggested that you have good intermediate skills to be successful with this pattern.
Details
- Project size: 64" x 64"
- Required tools: V Block, Tucker Trimmer 1, Corner Pop
- Fabric: 4 colors, Background, Outer Border
- Pattern # Mod018
Fiesta
$ 12.40
Olé! Spinning around and around this unusual star will amaze you with its simple construction; making spikey stars has never been so easy! By using the Split Rects and Corner Pop together you get a unique combination of sharp points that are perfect every time. This project is perfect for the stack of 10” squares awaiting its day to shine.
Details
- Project size: Lap, Twin, Queen
- Required tool: Split Rects, Corner Pop
- Fabric: Uses multicolored scraps, background fabric
- Pattern # Mod015
Effervescence
$ 12.40
Are you ready for a quilt project that’s a bright, bubbly departure from the norm? Well, Effervescence is the pattern for you! Using a combination of the unusual Corner Popped Squares and the Square Squared units, you are sure to make a project that will turn heads.
Details
- Three project sizes: 48" x 60"
- Required tools: Large Square Squared and the Corner Pop
- Fabric: 5 focus fabrics, dark accent, light accent, and background
- Pattern # Mod014
Fletcher Farm Stars
$ 12.40
Easy to make block and sashing stars adorn this design, which Deb created with a student while working at the Fletcher Farm School for the Arts and Crafts in Ludlow, Vermont. Best part of the construction is that no star points have to meet any other star points so it's a cinch to get super sharp points every time! You’ll use Studio 180 Design’s Corner Pop tool to easily construct this intricate looking quilt.
Details
- Project size: Twin, Queen, and King
- Required tool: Corner Pop
- Light, Medium, Dark, and Accent Fabrics
- Pattern # DTP008
Summer Blossoms
$ 12.40
Summer Blossoms was inspired by the vast flower gardens at Michelle’s home in Connecticut. This quilt has a light, airy feeling that provides a lot of movement, giving the illusion of flowers blowing in the summer breeze.
Details
- Project size: Throw and Queen
- Block size: 12”
- Required tool: Square Squared, Wing Clipper 1, and Corner Pop
- Fat Quarters + background + navy + yellow + lime
- Pattern # Mod006
Pop Luck
$ 12.40
Various dark and light fabrics make contrasting contributions to this fun and easy quilt, and it’s the perfect project to use those beautiful charm squares you’ve been collecting. You’ll use Deb’s Corner Pop tool to create this quilt brightly accented with pops of color.
Details
- Project size: 70" x 86”
- Block size: 8 ” finished
- Required tool: Corner Pop
- Dark scrap fabrics + light + accent + border
- Charm Square friendly
- Pattern # DTP055
Marrakesh
$ 12.40
Made with bold and intricate geometrics, just like you’d expect to see in the Moroccan city of Marrakesh, you’ll use Deb’s Tucker Trimmer 1 and Wing Clipper 1 tools to make this elegant quilt.
Details
- Project size: 82” x 97”
- Block size: 15" finished
- Required tools: Tucker Trimmer 1, and Wing Clipper 1
- Optional Tools: Square Squared and Corner Pop
- 3 fabrics + focus fabric + border fabric
- Pattern # DTP059
Grand Illusion
$ 12.40
Do you think this looks like a tricky quilt? You might think so, but that's the Grand Illusion! It's a cinch! The blocks and sashing in this amazing quilt are put together so it looks like the blocks are set on point. But they aren't! You’ll use Studio 180 Design’s Tucker Trimmer 1, Square Squared, and Corner Pop tools to create this simple yet complex looking quilt.
Details
- Project size: 71” x 91” (twin) or 91" x 111" (queen)
- Block size: 15” finished
- Required tools: Tucker Trimmer 1, Square Squared, and Corner Pop
- Fabrics: Focus fabric with coordinating light, medium, dark, and accent fabrics
- Pattern # DTP063
Floral Burst
$ 12.40
Put the Pop in the already adored Hunter’s Star! The Corner Pop tool helps you create a fun alternating block illusion. This quilt design works wonderfully with yardage, scraps, or fat quarters. Don’t be afraid to use some of those large floral prints, you may be surprised at the unexpected scrappiness! You’ll use our Rapid Fire Hunter’s Star - Large Star and Corner Pop to construct this energetic quilt.
Details
- Three project sizes: Baby (52” x 52”), Twin (70” x 88”), and Queen (106” x 106”)
- Block size: 9”
- Required tools: Rapid Fire Hunter’s Star - Large Star and Corner Pop
- Background with 4 different brights and border
- Pattern # Mod002
Finley's Fence
$ 12.40
Finley’s Fence features playful rings of interwoven colors, made up of fat quarters, to create this modern play on an Irish Links quilt. This whimsical quilt comes together easily with the help of the Tucker Trimmer 1 and with Michelle’s inventive use of the Corner Pop tool the otherwise difficult angled/bias unit becomes tons of fun to make.
Details
- Three project sizes: Baby (54” x 54”), Throw (66” x 78”), and Twin (78” x 102”)
- Block size: 12”
- Required tools: Tucker Trimmer 1 and Corner Pop
- Background with assorted brights and binding
- Pattern # Mod003
Amusement
$ 12.40
Amusement is a fun and quirky quilt inspired by the Ferris Wheels found on the Amusement Piers in NJ, where Michelle grew up. Ferris Wheels are enjoyed by so many of us, just like this quilt will be for the quilter making it and the recipient receiving it.
Details
- Three project sizes: Wall Quilt, Throw, or Twin
- Block size: 20”
- Required tool: Tucker Trimmer 1, Wing Clipper 1, and Corner Pop
- Fabric: background, accent, light, medium, and dark
- Pattern # Mod007