Quilter's Magic Wand
$ 9.00
The Quilter’s Magic Wand is an accurate ½” wide ruler with an etched line running down the middle. Use it for marking or measuring when high precision is required. It is especially useful for marking those diagonal seam lines when using the Tucker Trimmer and Wing Clipper lines of tools. It comes in 8 different colors, one to match everyone’s sewing room!
Details
- Rule size - ½” x 12”
- Used with Tucker Trimmer and Wing Clipper tools
- 7 different colors – Lime, Hot Pink, Beige/Champagne, Yellow, Orange, Blue and Plum/Light Pink,
- Free online video for constructions and trim down techniques (see below, also on YouTube)
- Item # DT04
Video Demonstrations
Wing Clipper I
$ 32.50
The Wing Clipper is a must have tool if you are making Flying Geese units for your quilt. This tool, and the associated Fast Flying Geese construction technique, allow you to make four finished units from five squares. The best part is that each unit is constructed slightly oversized so each can be trimmed to a perfect size with perfect seam placement once the sewing and pressing are complete by using the Wing Clipper tool. You can see the tool in action on our free online video demonstration below. Every single unit will be exactly right every time. Now who ever thought that would happen with Flying Geese units?!?!
Details
- Ruler size: 5½” x 10½”
- Ten unit sizes from ½” x 1” finished units to 5” x 10” finished units
- Note all sizes on this ruler are based on heights that finish to ½” or whole inch.
- Also the heights increase in half inch increments.
- Step by step illustrated instructions, available to download
- Instructions and illustrations for left hand trimming
- Chart for easy conversions of other patterns and designs
- Fine lines for higher accuracy
- Free online videos for constructions and trim down techniques (see below, also on YouTube)
- Numerous companion patterns available
- Item # DT07
Video Demonstrations
Tucker Trimmer I
$ 29.50
New & Improved 2019 edition!
The Tucker Trimmer tool was designed to help quilter’s quickly and easily trim down units that are made with triangles: half square triangle squares, quarter square triangle squares (hourglass units), and combinations of half square and quarter square triangle squares (combination units). It has multiple diagonals which allow you to align ruler guide lines with unit seam lines to quickly locate the exact center of pieced units. This makes trim down easy, precise, and perfect every time. No more figuring, or guessing, or struggling to find a center point, and you can see it demonstrated on our free online video demo. I use it for much more than just trimming however and consider it my “must have” tool every time I head to my cutting table.
Details
- Ruler size: 7” x 7”
- Eleven unit size options from 1” finished to 6” finished in half inch increments (trim sizes 1½” to 6½”)
- Step by step illustrated instructions for making half square triangle, hourglass, and combination units. Now available to download!
- Instructions and illustrations for left hand trimming
- Charts for easy conversion of other pattern instructions
- Free online videos for unit construction and tool trim down (see below, also on YouTube)
- Free bonus block pattern
- Numerous companion patterns available
- Item # DT03
Video Demonstrations
Tucker Trimmer III
$ 45.50
New & Improved 2019 edition!
The third in the Tucker Trimmer series of rulers, this version of our Tucker Trimmer is used for any block or unit that is larger than a 6” finished block size. It has all of the sizes of the Tucker Trimmer I plus thirteen additional size options up to and including trimming blocks to 13” (that will finish to 12 ½” when sewn). I love to use this tool to trim down my Lemoyne Star blocks made with my Rapid Fire Lemoyne Star tool and any type of block that needs to be trimmed and squared to a specific size. A terrific tool with all the same benefits as the original Tucker Trimmer.
Details
- Ruler size - 13” x 13”
- Twenty four unit size options from 1” finished to 12½” finished in half inch increments (trim sizes 1½” to 13”)
- Step by step illustrated instructions for making half square triangle, hourglass, and combination units. Now available to download!
- Instructions for left hand trimming
- Charts for easy conversion of other pattern instructions
- Free online videos for unit construction and tool trim down (see below, also on YouTube)
- Free bonus block pattern
- Numerous companion patterns available
- Item # DT06
Video Demonstration
Four Patch Square Up
$ 33.50
Four Patches, basic units that seem so simple to make. Just stitch 4 squares together, either individually or with strip piecing and you’re good to go. But anyone who has attempted these units knows that they are notoriously difficult to make perfectly. Either the unit size isn’t quite right, the edges just don’t quite line up, or they’re just not quite square. Ugh. Even experienced stitchers encounter these problems.
The Four Patch Square Up© Tool is the solution. Like all the Studio 180 Design rulers and processes, this tool and technique will have you build your units slightly oversized and then quickly trim them to perfect shapes. The Four Patch Square Up© Tool is designed to work with units that finish to whole or half inch increments, from ½” finished up to 6” finished unit sizes. The tool’s perfectly engineered lines are designed to quickly locate and align with the unit center and the sewn seams, allowing for easy trimming on all four sides. The accuracy is amazing!
Your units will be the correct size. They will have seams properly positioned. And they will have edges that are straight , even, and square. No more guess work! So jump in and give it a try, you will be absolutely thrilled with the results.
Details
- Ruler Size: approx. 7" x 13"
- Twelve size options from ½" to 6" finished units in ½" increments
- Step by step illustrated instructions, available to download
- Instructions for left hand cutting and trimming
- Fine lines for higher accuracy
- Free online video for unit construction and tool trim down
- Item # DT17
Square Squared
$ 32.50
Finally a tool that simplifies the construction of the Diamond Square unit without having to use paper foundation piecing. The Square Squared is an all-in-one tool that gives you a window template for accurately cutting the center square, a chart printed right on the ruler for the recommended size to cut the triangles sewn to the four sides of the center square and a trim down section on the ruler that simplifies the alignment of ruler to fabric unit and allows everyone to clean up the unit to a precise measurement every time. You can see the tool demonstrated on our free online video demonstration (see below, also on YouTube). This unit is a tricky one to get accurate, but with the Square Squared tool and technique of oversizing and trimming down you’ll have far better success than with any other product on the market.
Details
- Ruler size: 6½” x 12”
- Six unit size options from 1” to 6” finished units
- Step by step illustrated instructions, available to download
- Instructions for left hand cutting and trimming
- Fine lines for high accuracy
- Free online video for constructions and trim down techniques (see below, also on YouTube)
- Numerous companion patterns available
- Item # DT09
Video Demonstration
Corner Pop
$ 38.50
Finally, a tool and technique that will give you high success adding fabric corners to basic shapes. For years we’ve been layering small squares on big squares, marking & stitching on a diagonal line, then hoping everything lines up when we fold the small corner section back into place. If you’ve tried it, you know the pitfalls: too big, too short, too crooked and way too wasteful. No more. With your new Corner Pop tool, you will be able to trim rather than mark, add an oversized replacement triangle and then square everything to a perfect size. In twenty two different sizes - whole, half and quarter inches. Increased success without undue stress for every level of quilter. What’s not to love!
Details
- Ruler Size: approx. 9½" x 9½"
- Twenty two size options from ¾" finished corners to 6" finished corners in ¼" increments
- Step by step illustrated instructions, available to download
- Instructions for left hand cutting and trimming
- Fine lines for higher accuracy
- Free online video for unit construction and tool trim down (see below, also on YouTube)
- Numerous companion patterns available
- Item # DT16
Video Demonstration
Corner Pop II
$ 38.50
I'm proud to announce a brilliant tool collaboration between Studio 180 Design and the Running with Scissors Quilters, The Corner Pop II! Built upon the same idea as the original Corner Pop tool, this tool will allow you to add popped corners with a 2:1 ratio. What that means is that CP2 will make pops that are twice as tall as they are wide which will give you some great, spiky looks.
Details
- Ruler Size: approx. 8" x 14"
- Twenty one size options
- Step by step illustrated instructions, available to download
- Instructions for left hand cutting and trimming
- Fine lines for higher accuracy
- Free online video for unit construction and tool trim down (coming soon)
- Numerous companion patterns are available
- Item # DT20
Corner Pop III
$ 38.50
I'm proud to announce a brilliant tool collaboration between Studio 180 Design and the Running with Scissors Quilters, The Corner Pop III! Built upon the same idea as the original Corner Pop tool, this tool will allow you to add popped corners with a 3:1 ratio. What that means is that CP3 will make pops that are three times as tall as they are wide which will give you some great, spiky looks.
Details
- Ruler Size: approx. 6" x 13"
- Twenty one size options
- Step by step illustrated instructions, available to download
- Instructions for left hand cutting and trimming
- Fine lines for higher accuracy
- Free online video for unit construction and tool trim down (coming soon)
- Numerous companion patterns available
- Item # DT21
Pint Size Tucker Trimmer
$ 29.50
The Pint Size Tucker Trimmer combines the 12 smallest sizes from our original Tucker Trimmer I and Tucker Trimmer II into one easy to use tool giving you access to ¼”, ½”, ¾” and whole inch size units all on the same tool. Use it to quickly and accurately trim down units that are made with triangles: half square triangle squares, quarter square triangle squares (hourglass units), and combinations of half square and quarter square triangle squares (combination units). It has multiple diagonals which allow you to align ruler guide lines with unit seam lines to quickly locate the exact center of pieced units. This makes unit construction easy, precise and perfect every time.
The Pint Size Tucker Trimmer is compact, easy to read, and provides the same great results you've come to expect from all Studio 180 Design tools. It is the perfect tool for those who prefer to make quilts using smaller units!
Details
- Ruler Size: 6¾” x 6¾”
- Twelve unit size options from ¼” finished to 3" finished in ¼”, ½”, ¾” and whole inch increments (trim sizes ¾” to 3½”)
- Step by Step illustrated instructions for making half square triangles, hourglass and combination units included. Download available here.
- Instructions illustrated for left handed trimming
- Chart for easy conversion of other pattern instructions
- Fine lines for higher accuracy
- Free online videos for unit construction and tool trim down (coming soon)
- Item #DT23
Pint Size Wing Clipper
$ 32.50
The Pint Size Wing Clipper combines the four smallest sizes from our original Wing Clipper I and Wing Clipper II tools, allowing you to create 8 of the most commonly used Flying Geese sizes. This tool and the associated Fast Flying Geese construction technique, allows you to make four finished units from five squares. The best part is that each unit is constructed slightly oversized so they can be trimmed to a perfect size with perfect seam placement using the Pint Size Wing Clipper tool. Every single unit will be exactly right every time. Who ever thought that would happen with Flying Geese units?!?!
Details
- Ruler Size: 4½” x 8¼”
- Eight unit sizes from ½” x 1" finished to 2¼”x 4½” finished units
- Note all sizes on this ruler are based on heights that finish in ¼”, ½”, ¾” and whole inch increments
- Unit heights increase in ¼” increments
- Step by step illustrated instructions included with the tool.
- Instructions and illustrations for left handed trimming included
- Chart for easy conversions of other patterns and designs
- Fine lines for higher accuracy
- Free online videos for construction and trim down (coming soon)
- Item # DT24
Eighth Inch Wing Clipper
$ 32.50
The Eighth Inch Wing Clipper can trim down 8 different size flying geese that finish in ⅛”, ⅜”, ⅝” and ⅞” increments. This is the perfect tool for all those projects that call for these tricky size units. This tool and the associated Fast Flying Geese construction technique, allows you to make four finished units from five squares. The best part is that each unit is constructed slightly oversized so they can quickly be trimmed to a perfect size with perfect seam placement using the Eighth Inch Wing Clipper tool. Every single unit will be exactly right every time. Who ever thought that would happen with Flying Geese units?!?!
Details
- Ruler Size: 4¾” x 8¾”
- Eight unit sizes from ⅝”x 1¼” finished to 2⅜”x 4¾” finished units
- Note all sizes on this ruler are based on heights that finish in ⅛”, ⅜”, ⅝” and ⅞” increments
- The heights increase in ¼” increments
- Step by step illustrated instructions included with the tool and also available to download
- Instructions and illustrations for left handed trimming included
- Chart for easy conversions of other patterns and designs
- Fine lines for higher accuracy
- Free online videos for construction and trim down (coming soon)
- Item #DT26
Eighth Inch Tucker Trimmer
$ 29.50
The Eighth Inch Tucker Trimmer trims down 13 different unit sizes in ⅛”, ⅜”, ⅝” and ⅞” increments. For all the times when you just have to trim to an ⅛” increment. Use it to quickly and accurately trim down units that are made with triangles: half square triangle squares, quarter square triangle squares (hourglass units), and combinations of half square and quarter square triangle squares (combination units). It has multiple diagonals which allow you to align ruler guide lines with unit seam lines to quickly locate the exact center of pieced units. This makes unit construction easy, precise and perfect every time and it’s also handy for cutting those ⅛” squares from strips.
It is compact, simple to read, and provides the same great results you've come to expect from all Studio 180 Design tools. It is the perfect tool for those who prefer to make quilts using smaller units!
Details
- Ruler Size: 7½” x 7½”
- Thirteen unit size options from ⅜” finished to 3⅜” finished in ⅛” increments (trim sizes ⅞” to 3⅞”)
- Step by Step illustrated instructions included for making half square triangle, hourglass and combination units. Now available to download!
- Instructions illustrated for left handed trimming
- Charts for easy conversion of other pattern instructions
- Free online videos for unit construction and trim down (coming soon)
- Item #DT25